AutoLab Video Series Part 2 – Populating the NAS Build Share

April 27, 2014 Hersey

This is the second video of my AutoLab Video Series. The first video covered obtaining AutoLab and setting up VMware Workstation to run AutoLab. Part 1 of the series can be found at http://www.vhersey.com/2014/04/autolab-video-series-part-1-initial-setup/.

This video, Part 2, covers populating the NAS Build share with the software needed for the AutoLab environment. The video also covers setting up the automate.ini file to automatically install the vCenter server and add the hosts to vCenter inventory.

Video Links:
AutoLab – http://www.labguides.com/autolab/

The utility I use to mount the ISOs to extract the files from them can be found here: http://www.slysoft.com/en/virtual-clonedrive.html

The next video in the series will cover AutoLab automated builds of the vSphere lab VMs…

Post Views: 4,998

2 thoughts on “AutoLab Video Series Part 2 – Populating the NAS Build Share”

Raza

May 14, 2014 at 4:48 am

Hello Hersey,

Please accept my KUDOS such nice and easy way to describe how to setup the lab, I am currently prepare my VCAP5 exam, I found your 3 videos with respect to Autolab home setup but VC Lab installation instruction is missing some how.

if you have can you please share with us

Much appreciate in advance

thanks
- vHersey
  
  May 14, 2014 at 11:11 am
  
  Thanks for stopping by. Glad you found the videos helpful. The video for setting up the VC in AutoLab is in the works and should be posted this weekend.

vHersey – VCDX Two to the Seventh Power (#128)

AutoLab Video Series Part 2 – Populating the NAS Build Share

Related Posts:

2 thoughts on “AutoLab Video Series Part 2 – Populating the NAS Build Share”

Leave a Reply to vHersey Cancel reply