With the efficiency SimpliVity’s Data Virtualization Platform (DVP) brings to data with accelerated inline deduplication, compression, and optimization SimpliVity customers often need to scale compute before they need to scale storage. As long as the SimpliVity environment is capable of providing the storage capacity and performance required the CPU and memory resources can be scaled out using what we call compute nodes. A compute node is simply a x86 server on VMware’s HCL which supports running ESXi. Compute nodes provide additional CPU and memory resources to the environment while consuming the SimpliVity DVP for storage. Using compute nodes is a native capability of the SimpliVty DVP and does not require any additional SimpliVity licensing.
Another common deployment we see is for customers who have made an investment in blade servers, such as Cisco UCS B-Series environment. The blades can also be used as compute nodes with the SimpliVity DVP providing storage. This typically looks something like this for a UCS B-Series environment:
In both of these scenarios the SimpliVity datastores are presented to the compute nodes as NFS datastores.
Once the SimpliVity datastores are presented to the compute nodes, any workloads running on the SimpliVity datastores will receive all the features and advantages provided by the SimpliVity DVP. All data will be deduplicated, compressed, and optimized at inception. This means features such as SimpliVity Rapid Clone, SimpliVity Backup, and SimpliVity Restore will be available for the workloads even though they are not running directly on the SimpliVity nodes.
There are a couple of requirements for leveraging compute nodes. First off the compute nodes need to be connected to the SimpliVity storage network using 10GbE. Secondly ESXi running on the compute nodes needs to be configured with the correct advanced settings for TCPIP, NFS, and RPC. The setting for these options are dependent on the version of ESXi running on the compute nodes.
I have put together a PowerCLI script which will check the advanced settings required for the compute nodes and set them. The script can be found here: https://github.com/herseyc/SVT/blob/master/check-svtnfs.ps1
In the script there are number of variables defined dependent on the version of ESXi running on the compute nodes:
$SVTnettcpipheapmax = 1536 #ESXi 5.1 use 128, 5.5 use 512, 6.0 use 1536 $SVTnettcpipheapsize = 32 $SVTnfsmaxvolumes = 256 $SVTsunrpcmaxconnperip = 128
The above settings are for ESXi 6.x. If you are running the script against earlier versions of ESXi, update these variables to reflect those settings. The required settings for other supported versions of ESXi can be found in the SimpliVity Administrator Guide.
To run the script simply pass the host’s vCenter inventory name on the command line. The -CheckOnly option check the settings but does not change anything.
check-svtnfs.ps1 ESXi1 -CheckOnly
Run the script without the -CheckOnly parameter to change the advanced settings.
Here is an example after running check-svtnfs.ps1 against an ESXi host with the -CheckOnly parameter, then running it to make the changes, and finally running it with the -CheckOnly option to validate:
The changes can be made without placing the host in maintenance mode, but they will not take effect until after the host is rebooted.
Once the Advanced Settings have been configured, edit the /etc/hosts file on each ESXi host. Add an entry for omni.cube.io which points to the IP Address of an OmniCube Virtual Controller (OVC). Details on completing this can be found in the OmniStack Administration Guide.
The SimpliVity VAAI NFS Plugin is then installed on the compute node. The process for this is dependent on the version of ESXi/SimpliVity DVP and details for the installation can be found in the SimpliVity Administrator Guide. The VIB (vSphere Installation Bundle) for the SimpliVity VAAI NFS Plugin is included on the OmniCube Virtual Controller and is installed using the esxcli (n is the ESXi version (5/6) and o.o.o.o is the plugin/OmniStack version ie 184.108.40.206 for the latest).
esxcli software vib install --viburl=http://managementipaddressofovc/vaai/simplivity-esx-n.x-nas-plugin-o.o.o.o.vib
Once the compute nodes have been properly prepared the SimpliVity Datastores are presented to them using the vSphere Client. In the Web Client this is done using the Manage Standard ESXi Hosts dialog as shown below:
The compute nodes can now consume the SimpliVity DVP and provide additional CPU and memory resources to the datacenter.